NR 400.02(8)
(8) “Actual production" means, for purposes of nonmetallic mineral quarrying or mining, sales amount in tons of nonmetallic mineral as measured at the quarry or mine.
NR 400.02(9)
(9) “Administrator" means the administrator of the EPA or designee.
NR 400.02(10)
(10) “Affected source" means a stationary source that includes one or more affected units that are subject to an emissions reduction requirement or emissions limitation under the acid rain program.
NR 400.02(11)
(11) “Affected unit" means an emissions unit that is subject to any emissions reduction requirement or emissions limitation under the acid rain program.
NR 400.02(16)
(16) “Air pollution" means the presence in the atmosphere of one or more air contaminants in such quantities and of such duration as is or tends to be injurious to human health or welfare, animal or plant life, or property, or would unreasonably interfere with the enjoyment of life or property.
NR 400.02(18)
(18) “Air quality control region" or “AQCR" means an area designated under
42 USC 7407 or s.
NR 404.03 in which a plan to maintain or achieve air standards is implemented on a regional basis. Air quality control regions include both interstate and intrastate regions.
NR 400.02(19)
(19) “Air region" means an area such as an AQCR designated pursuant to federal or Wisconsin laws in which a program to maintain or achieve air standards is implemented on a regional basis.
NR 400.02(19m)
(19m) “Air standard" or “ambient air quality standard" means the specified levels of air quality which are necessary to protect public health and welfare. Ambient air quality standards include primary and secondary air standards.
NR 400.02(22)
(22) “Alternate designated representative" means a responsible natural person, authorized by the owners and operators of an affected source and of all affected units at the source to act in lieu of the designated representative, as evidenced by a certificate of representation submitted in accordance with
40 CFR 72.22, who may act on behalf of the designated representative to represent and legally bind each owner and operator, as a matter of federal law, in matters pertaining to the acid rain program.
NR 400.02(23)
(23) “Alternative method" means any method of sampling and analyzing for an air pollutant which is not a reference or equivalent method but which has been demonstrated to the department's satisfaction to produce, in specific cases, results adequate for the department's determination of compliance.
NR 400.02(24)
(24) “Ambient air" means the portion of the atmosphere external to buildings and to which the general public has access.
NR 400.02(25)
(25) “Ambient air increment" or “air increment" means the maximum allowable increase in concentration of an air contaminant above the base line concentration of the air contaminant.
NR 400.02(26)
(26) “Applicable requirement" means all of the following as they apply to emissions units at a source, including requirements that have been promulgated or approved by EPA or the department through rulemaking at the time of permit issuance but for which compliance is required after the date of permit issuance:
NR 400.02(26)(a)
(a) Any standard or other requirement provided for in the applicable implementation plan approved or promulgated by EPA through rulemaking in
40 CFR part 52.
NR 400.02(26)(b)
(b) Any term or condition of any construction permit issued pursuant to ch.
NR 405,
406 or
408 or to regulations approved or promulgated by EPA through rulemaking under title I of the Act (
42 USC 7401 to
7515).
NR 400.02(26)(e)
(e) Any standard or other requirement of the acid rain program.
NR 400.02(26)(h)
(h) Any standard or other requirement for consumer and commercial products, under section 183 (e) of the Act (
42 USC 7511b (e)).
NR 400.02(26)(j)
(j) Any standard or other requirement of the regulations promulgated to protect stratospheric ozone under title VI of the Act (
42 USC 7671 to
7671q), unless the administrator has determined that the requirements need not be contained in an operation permit.
NR 400.02(26)(k)
(k) Any national ambient air quality standard or increment or visibility requirement under part C of title I of the Act (
42 USC 7470 to
7492).
NR 400.02(26)(m)
(m) Any source-specific emission limitation established pursuant to ch.
285, Stats., or rules promulgated thereunder.
NR 400.02(26m)
(26m) “Application equipment" means a device used to apply adhesive, coating, ink or polyester resin materials.
NR 400.02(27)
(27) “Approved" means approved by the department of natural resources.
NR 400.02(27m)
(27m) “Approved material safety data sheet" means a material safety data sheet which meets the reporting requirements of the Superfund Amendments Reauthorization Act of 1986 (
42 USC 9671 to
9675) or regulations of the occupational safety and health administration under
29 CFR 1910.1200 (g), as in effect on February 1, 1998.
NR 400.02(29)
(29) “Basic emissions unit" means the smallest collection of equipment which in combination emits or is capable of emitting any air contaminant.
NR 400.02(30)
(30) “Belt conveyor" means a conveying device that transports material from one location to another by means of an endless belt that is carried on a series of idlers and routed around a pulley at each end.
NR 400.02(33)
(33) “Boiler" means any device with an enclosed combustion chamber in which fuel is burned to heat a liquid for the primary purpose of producing heat or power by indirect heat transfer.
NR 400.02(34)
(34) “Breakdown" means a sudden failure of emission control or emission monitoring equipment to function as a result of wear, failure to repair, breakage, unavoidable damage, or other unintentional causes.
NR 400.02(35)
(35) “Bucket elevator" means a conveying device for grain, minerals or other materials consisting of a head and foot assembly which supports and drives an endless single or double strand chain or belt to which buckets are attached.
NR 400.02(36)
(36) “Bulk gasoline plant" means a gasoline storage and distribution facility which receives gasoline from bulk terminals, stores it in stationary storage tanks, and subsequently distributes it to gasoline dispensing facilities.
NR 400.02(37)
(37) “Capacity" means, for purposes of nonmetallic mineral processing, the cumulative rated capacity of all initial crushers that are part of a processing plant.
NR 400.02(38)
(38) “Capture efficiency" means the weight per unit time of an air contaminant entering a capture system and delivered to a control device divided by the weight per unit time of the air contaminant generated by the source, expressed as a percentage.
NR 400.02(39)
(39) “Capture system" means the equipment (including hoods, ducts, fans, etc.) used to contain, capture, or transport an air contaminant to a control device.
NR 400.02(40)
(40) “Coal" means all solid fuels classified as anthracite, bituminous, subbituminous or lignite by ASTM designation D388-99e1 (2004), incorporated by reference in s.
NR 484.10 (7).
NR 400.02(41)
(41) “Coal-derived fuel" means any fuel, whether in a solid, liquid or gaseous state, produced by the mechanical, thermal or chemical processing of coal, such as pulverized coal, coal refuse, liquified or gasified coal, washed coal, chemically cleaned coal, coal-oil mixtures and coke.
NR 400.02(42)
(42) “Coin-operated dry cleaning machine" means a dry cleaning machine that is operated by the customer by placing articles into the machine, turning the machine on, and removing articles from the machine.
NR 400.02(43)
(43) “Cold cleaning" means the batch process of cleaning and removing soils from metal surfaces by spraying, brushing, flushing or immersion while maintaining the solvent below its boiling point. Wipe cleaning is not included in this definition.
NR 400.02(44)
(44) “Commence construction" means to engage in a program of on-site construction, including a site clearance, grading, dredging or landfilling specifically designed for a stationary source in preparation for the fabrication, erection or installation of the building components of the stationary source.
NR 400.02(45)
(45) “Commence modification" means to engage in a program of on-site modification which may include site clearance, grading, dredging or landfilling in preparation for a specific modification of a stationary source.
NR 400.02(45m)
(45m) “Contact adhesive" means an adhesive that is applied to 2 substrates, dried and mated under only enough pressure to result in good contact. The bond is immediate and sufficiently strong to hold pieces together without further clamping, pressure or airing.
NR 400.02(46)
(46) “Control device" means equipment used to destroy or remove air contaminants in a gas stream exiting a capture system prior to emission.
NR 400.02(47)
(47) “Control efficiency" means the percentage by which a control device or technique reduces the emissions from a stationary source.
NR 400.02(48)
(48) “Control system" means any number of control devices, including condensers, which are designed and operated to reduce the quantity of air contaminants emitted to the atmosphere.
NR 400.02(49)
(49) “Conveyorized non-vapor degreasing" means the continuous process of cleaning and removing soils from metal surfaces by operating with non-vaporized solvents.
NR 400.02(50)
(50) “Conveyorized vapor degreasing" means the continuous process of cleaning and removing soils from metal surfaces by operating with vaporized solvents.
NR 400.02(51)
(51) “Crusher" means a machine used to crush any nonmetallic minerals, and includes, but is not limited to, the following types: jaw, gyratory, cone, roll, rod mill, hammermill and impactor.
NR 400.02(52)
(52) “Day" means a 24-hour period beginning at midnight.
NR 400.02(53)
(53) “Department" means the department of natural resources, state of Wisconsin.
NR 400.02(54)
(54) “Designated representative" means a responsible natural person authorized by the owners and operators of an affected source and of all affected units at the source, as evidenced by a certificate of representation submitted in accordance with
40 CFR 72.20 to
72.25, to represent and legally bind each owner and operator, as a matter of federal law, in matters pertaining to the acid rain program.
NR 400.02(54m)
(54m) “Digital printing" means the transfer of electronic files directly from a computer to an electronically driven output device that prints the image directly on the selected substrate. Printing using home and office equipment is excluded from this definition.
NR 400.02(55)
(55) “Direct source" means any stationary source which may directly result in the emission of any air contaminant at a fixed location.
NR 400.02 Note
Note: Examples are a foundry, a grain elevator, a gravel or stone quarry, a paper mill, a power plant or the demolition of a building.
NR 400.02(57)
(57) “Emission" means a release, whether directly or indirectly, of any air contaminant to the atmosphere.
NR 400.02(59)
(59) “Emission point" means any individual opening at a fixed location through which air contaminants are emitted.
NR 400.02(61)
(61) “Emissions unit" means any part of a stationary source which emits or is capable of emitting any air contaminant.
NR 400.02(62)
(62) “Equivalent method" means any method of sampling and analyzing for an air pollutant which has been demonstrated to the department's satisfaction to have a consistent and quantitatively known relationship to the reference method, under specified conditions.
NR 400.02(63)
(63) “Facility" means an establishment—
residential, commercial, institutional or industrial—which emits or causes emissions of air contaminants.
NR 400.02(64)
(64) “Federally enforceable" means all limitations and conditions which are enforceable by the administrator, including those requirements developed pursuant to chs.
NR 440 and
447 to
449 and subch.
III of ch. NR 446 and under sections 111 and 112 of the Act (
42 USC 7411 and
7412), requirements within any applicable state implementation plan and any permit requirements established pursuant to ch.
NR 405,
406,
407,
408, or
409 except those limitations and conditions which are designated as not federally enforceable.
NR 400.02 Note
Note: Permit or state implementation plan limitations generally considered federally enforceable are limitations on the allowable capacity of the equipment, requirements for the installation, operation and maintenance of pollution control equipment, limits on hours of operation and restrictions on amounts of materials combusted, stored or produced. To be federally enforceable, restrictions on operation, production or emissions must reflect the shortest practicable time period, in no event for a period in excess of 30 days, and they must be tied to other enforceable operating restrictions at the source. General limitations on potential to emit, such as yearly limits in tons per year, by themselves, are not considered federally enforceable. The use of hourly, daily, weekly or monthly rolling averages are generally acceptable. Any federally enforceable limitations or conditions must be practically enforceable, ensure continuous compliance with the restrictions and include adequate testing, monitoring and recordkeeping procedures in an applicable federally issued permit, in a federally approved state implementation plan or in a permit issued under the state implementation plan.
NR 400.02(65)
(65) “Fixed capital cost" means the capital needed to provide all of the depreciable components of a stationary source.
NR 400.02(66)
(66) “Fixed plant" means any nonmetallic mineral processing plant at which the processing equipment is attached or clamped by a cable, chain, turnbuckle, bolt or other means, except electrical connections, to any anchor, slab or structure including bedrock.
NR 400.02(66m)
(66m) “Forest County Potawatomi Community Class I area" or “FCPC Class I area" means those land parcels of the Forest County Potawatomi Reservation that are designated as a non-federal Class I area by EPA under
40 CFR 52.2581. The FCPC Class I area has a geographic center, as determined by the department, at latitude 45.49978
°N, longitude 88.64377
°W.
NR 400.02(67)
(67) “Fossil fuel" means natural gas, petroleum, coal or any form of solid, liquid or gaseous fuel derived from such material.
NR 400.02(68)
(68) “Fossil fuel-fired" means the combustion of fossil fuel or any derivative of fossil fuel, alone or in combination with any other fuel, without regard to the percentage of fossil fuel consumed in any calendar year.
NR 400.02(69)
(69) “Fuel" means any solid, liquid or gaseous materials used to produce useful heat or power by burning.
NR 400.02(70)
(70) “Fuel oil" means any petroleum-based fuel, including diesel fuel or petroleum derivatives such as oil tar, as defined in ASTM D396-02a, incorporated by reference in s.
NR 484.10 (8), and any recycled or blended petroleum products or petroleum by-products used as a fuel whether in a liquid, solid or gaseous state.
NR 400.02(71)
(71) “Fugitive emission" means an emission from any emission point within a facility other than a flue or stack.
NR 400.02(72)
(72) “Gasoline" means any petroleum distillate or petroleum distillate/alcohol blend having a Reid vapor pressure of 27.6 kilopascals or greater which is used as a fuel for internal combustion engines.
NR 400.02(73)
(73) “Gasoline dispensing facility" means any site where gasoline is dispensed to motor vehicle gasoline tanks from stationary storage tanks.
NR 400.02(73m)
(73m) “General permit" means a permit that may be applicable to similar stationary sources and is issued in accordance with s.
285.60 (3), Stats.
NR 400.02(74)
(74) “Graphic arts" means any printing operations described by 2-digit major group 27 in the Standard Industrial Classification Manual, 1987, incorporated by reference in s.
NR 484.05 (1).
